Hendi 281444 Bedienungsanleitung Seite 8

Door Open Mode
Door open mode is activated by opening the door. During this mode, the screen is blank. And the fan
and oven lamp work. During operation, when the door is opened the program will be paused, the fan
keeps rotating and the light is on.
Manual Entry Mode
Make sure the microwave is under Ready Mode.
Select the time with the '
play will show "00:00", select the requested
time with the number keyboard. After that, se-
lect the power level by pressing [0%/20%(De-
frost)/50%/70%]. The display will show the se-
lected power. If you press again the same power
Pause Mode
This mode allows users to pause the cycle to
inspect or stir the food while the microwave
is operating. Open the door or press the '
' button to pause the cycle. The display will
Preset program mode
This microwave comes with 10 preset pro-
grams. When the microwave is in 'Ready Mode'
press one of the number keys and the micro-
EN
wave will run the program. Below you'll find
Button
Display time
8
' button, the dis-
1 2 3
0:10 0:20 0:30
level button, the power will be set back to 100%
power. Also, if no power level button is set,
the power will be default to 100% power. When
everything is set, press the ' ' button, now the
microwave will start operating. At the end of the
cycle the display will show 'End'.
show the remaining time. To resume the cycle,
close the door and press the ' ' button. When
nothing is done the microwave will go into idle
mode within 1 minute.
the 10 preset programs. When operating the
microwave shows the remaining time in the
display, when it's a multi-stage program the
total remaining time will be displayed.
4 5 6
0:45 1:00 1:30
7 8 9
2:00 3:00 4:00
0
5:00