Hendi 281444 Bedienungsanleitung Seite 10

Multi stage cooking Mode
This function allows the user to cook the food
under different combination of power levels by
"Manual Entry mode or Programming mode.
The maximum number of stages is 3. To use
this function first follow the steps under 'Man-
ual entry'. After setting the time and power
of the first stage press '
shows "S-2", now input the desired time and
power. If a third stage is needed, press "time
entry" once more, the display will show "S-3",
and input the desired time and power. Now
press the ' ' button to start the microwave.
Multi stage input is set in a same manner while
in programming mode. Bellow an example of
how this could work:
1) Open the door, then press and hold number
"1" on the number keyboard for 4 ~ 6 sec-
onds, display will show "ProG".
2) Press number button '3', the program will
be saved in "3".
3) Press the number buttons '1' '2' '5' to set the
cooking time. The display will show "1:25".
4) Press for the power level of stage 1. The
EN
display will show "PL7".
Return to factory settings
To return the microwave back to the factory
settings press and hold the ' ' and '0' button
together until the buzzer sounds, the display
will show "00". Then, press ' '. When the mi-
crowave restored the factory settings the dis-
10
' again, the display
5) To set the second stage press 'time entry'
button, the display will show "S-2".
6) Press the number buttons '3' 3' '0' to set the
cooking time. The display will show '3:30'.
7) Press for the power of stage 2. The dis-
play will show "PL5".
8) To set the third stage press 'time entry' but-
ton once more, the display will show "S-3".
9) Press the number buttons '1' 0' '0' to set the
cooking time. The display will show '1:00'.
10) Press for the power of stage 3. The dis-
play will show "PL2".
11) Press the 'start' button. The multi stage
program is now saved under button '3'.
Note: Total cooking time is limited to 60 min-
utes only.
Note: When multi stage cooking is active the
microwave shows the total time remaining of
all stages.
Note: See also = = > Return to factory settings
play will show '11'. If returning to the factory
settings failed the display will show '00', press
' ' button and the display will now show
'CLEAR' and the buzzer will sound once.