Detach Soft Goods - Joie i-Spin Safe R Bedienungsanleitung

Detach the snaps on
the head support to
remove the head
portion of the infant
We recommend using the
full infant insert while the
baby is under 60cm and can
be used until they outgrow
the infant insert. The infant
insert increases side impact
protection.
5. Place the child into the enhanced child restraint and pass both arms
through the harnesses.
!
After the child is seated, recheck whether the shoulder harnesses
are at the proper height.
6. Engage the buckle. Please refer to
29
19
Remove the head support
portion of the infant insert
when the child's head no
longer fits comfortably.
Remove the body portion
of the infant insert when
the infant's shoulders no
longer fit comfortably.
insert.
Remove the infant insert
1
wedge by detaching the
snaps to allow more space
when the infant does not
fit comfortably. The
wedge can be used
separately without being
2
attached to the infant
insert to bolster the
infant's back for more
comfort.
29
7. Pull down the adjustment
webbing and adjust it to the
proper length to make sure your
child is properly secured. 30
!
Always keep child secured in
harness and properly tightened by
removing any slack.

Detach Soft Goods

see images -
31 37
Press the red button to disengage the
buckle.
31
-
Follow steps to detach soft
32 37
goods.
To re-attach the soft goods please
repeat the above steps in the reverse
step.
32
30
31
33
20