Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Height Adjustment
for Head Support and Shoulder Harnesses
see images
-
17
19
1. Please adjust the head support
and check if the shoulder
harnesses are at the correct
height according to
17
!
When used rear facing, the
shoulder harness height must be
even with or below the top of
child's shoulders.
17
2. Squeeze the head support
adjustment lever
, meanwhile
18
pull up or push down on the head
support until it snaps into one of
the 6 positions. The head support
positions are shown as
19
15
17
18
1
.
19
Using in the Rear Facing Mode
(Child height 40cm-105cm/Child weight
18.5kg/infant - 4 years old)
see images
!
Please install the enhanced child
restraint on the rear vehicle seat
and then put the child in the
enhanced child restraint.
1. Press the ISOFIX adjuster button
20
-1
and pull the base back from
the vehicle seat.
2
2. Press the rotating button to rotate
for easier side loading/unloading
of the child, then rotate the seat
to the rear facing position.
!
Press the rotating button on either
side to rotate the enhanced child
restraint.
-
20
30
20
21
-2
20
&
21
22
2
1
16
Werbung
Inhaltsverzeichnis
