Technical Data - DeWalt D21620 Handbuch

MAGNETIC DRILL PRESS
D21620
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Voltage
UK & Ireland
Type
Power input
No-load speed
Maximum drilling range in steel
with annular cutter
Tool holder (flat shank)
Spindle thread size
Weight
L (sound pressure)
PA
K ( sound pressure uncertainty)
PA
L (sound power)
WA
K (sound power uncertainty)
WA
Vibration total values (triax vector sum) determined according to
EN 61029:
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 61029 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
D21620
V 230
DC
V 230/115
DC
1
Fuses
W 1150
Europe
-1
min 350/650
U.K. & Ireland
U.K. & Ireland
mm 50
mm 19
Defi nitions: Safety Guidelines
UNF 1/2" x 20
The definitions below describe the level of severity
kg 13
for each signal word. Please read the manual and
pay attention to these symbols.
dB(A) 89.1
dB(A) 2.8
dB(A) 102
dB(A) 2.8
m/s² < 2.5
m/s² < 2.5
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools 10 Amperes, mains
230 V tools 13 Amperes
115 V tools 16 Amperes
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes sharp edges.
EN G LI SH
23