Before Initial Operation - Pkm Wolkenstein WGK218RT CR Bedienungsanleitung

7
M
IDDLE DOOR TRAY
8
B
OTTOM DOOR TRAY
9
A
DJUSTABLE FEET
11
G
LASS SHELF

4.2 Before initial operation

WARNING! While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
NOTICE! Leave the appliance in an upright position for 4 - 6 hours before
you connect it to the mains to ensure, that the oil has flowed back into the
compressor.
NOTICE! If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature setting
(s. chapter 4.3
or frozen food in the appliance. If you place food in the appliance before it
has reached its normal operating temperature, this foods can thaw and /
or spoil.
1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter
MAINTENANCE
3. Do not start the appliance immediately after installation. Wait 4 - 6 hours to
ensure proper operation.
4. The settings of the temperature of the fridge can be adjusted manually. To do
this, turn the temperature controller for the temperature setting to the desired
preference. (s. chapter 4.3 S
5. If operation was interrupted, wait 5 minutes before restart.
6. The appliance needs some time to balance temperatures when you have changed
the settings before or when you have stored additional food in the appliance. The
duration of this period of time depends on the range of the change, the ambient
temperature, the amount of food and the frequency of door-openings. When you
set the temperature of the fridge these aspects should be taken into account.
10 F
SETTING OF THE TEMPERATURE
).
ETTING OF THE TEMPERATURE
:
REEZER
) before you place any fresh
51
CLEANING AND
).