Installation; Site - Pkm Wolkenstein WGK218RT CR Bedienungsanleitung

3. Installation

All dimensions in these chapters are given in millimetres.
Fix the plastic wall spacers (depending on model) on the condenser at the back
of the appliance to ensure a ventilation gap between the appliance and the wall.
The minimum distances required for proper ventilation can be found in chapter
3.2.2 V
ENTILATION

3.1 Site

WARNING! While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
1. Unpack the appliance carefully. Dispose of the packaging as described in chapter
waste management.
2. The accessories of your appliance can be protected from damage due to
transportation (adhesive tapes etc.). Remove such tapes very carefully. Remove
remains of such tapes with a damp cloth using lukewarm water and a mild
detergent (see also chapter
components of the back of the appliance!
3. Install the appliance in a suitable position with an adequate distance from sources
of heat and cold.
4. If the appliance is positioned beside another fridge or freezer, leave at least a free
space of 2.0 cm between the appliances in order to avoid condensation.
5. Check that the appliance and the power cord are not damaged.
6. Install the appliance in a dry and well-ventilated place.
7. Protect the appliance from direct sunlight.
8. The doors must open completely and without hindrance.
9. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
10. Connect the appliance to the mains properly.
11. The rating plate is inside the appliance or at the back.
.
CLEANING AND MAINTENANCE
46
). Never remove any