Customer Service; Accessories And Spare Parts; Eu Declaration Of Conformity - Kärcher HDS 6/14-4 C/CX Bedienungsanleitung

Set temperature is not achieved while using
– Working pressure/flow rate to high
 Reduce working pressure/flow quantity at the pres-
sure/volume regulator in the pump unit.
– Sooty heating spiral
 Have device de-sooted by customer service.

Customer Service

If malfunction can not be fixed, the device must be
checked by customer service.
The warranty terms published by the relevant sales
company are applicable in each country. We will repair
potential failures of your appliance within the warranty
period free of charge, provided that such failure is
caused by faulty material or defects in manufacturing. In
the event of a warranty claim please contact your dealer
or the nearest authorized Customer Service centre.
Please submit the proof of purchase.

Accessories and Spare Parts

Note: When connecting the appliance to a chimney or if
the device cannot be accessed visually, we recommend
the installation of a flame monitor (option).
Only use original accessories and spare parts, they en-
sure the safe and trouble-free operation of the device.
For information about accessories and spare parts,
please visit www.kaercher.com.

EU Declaration of Conformity

We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements of the EU Directives, both in its basic design
and construction as well as in the version put into circu-
lation by us. This declaration shall cease to be valid if
the machine is modified without our prior approval.
Product: High pressure cleaner
Type: 1.170-xxx
Type: 1.174-xxx
Relevant EU Directives
2014/68/EU
2006/42/EC (+2009/127/EC)
2014/30/EU
2000/14/EC
Component category
II
Conformity procedure
Module H
Heating coil
Conformity assessment Module H
Safety valve
Conformity assessment Art. 4 para 3
control block
Conformity assessment Module H
various pipes
Conformity assessment Art. 4 para 3
Applied harmonized standards
EN 60335–1
EN 60335–2–79
EN 55014–1: 2006+A1: 2009+A2: 2011
EN 55014–2: 2015
24
hot water
Warranty
EN 61000–3–2: 2014
EN 62233: 2008
HDS 8/18-4, HDS 9/17-4:
EN 61000–3–3: 2013
HDS 6/14-4:
EN 61000–3–11: 2000
Name of the appointed agency:
for 2014/68/EU
TÜV Rheinland Industrie Service GmbH
Am Grauen Stein
51105 Köln
ID No. 0035
Applied conformity evaluation method
2000/14/EC: Appendix V
Sound power level dB(A)
HDS 6/14-4
Measured:
Guaranteed:
HDS 8/18-4
Measured:
Guaranteed:
HDS 9/17-4
Measured:
Guaranteed:
5.957-989
The undersigned act on behalf and under the power of
attorney of the company management.
Chief Executive Officer
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2017/01/01
– 8
EN
88
91
87
90
88
91
Head of Approbation