Operation; Before Getting Started; Switching The Appliance On And Off; Setting The Temperature - hanseatic HKGK18860A2NFSS Gebrauchsanleitung

Operation

Before getting started

• Read chapter "For your safety" on page
GB-10 and all the safety notices con-
tained in it.
• Set up and connect the appliance as
described in chapter "Start-up" on page
GB-21.
Switching the appliance on
and off
NOTICE
Risk of damage!
Improper handling of the appliance
can lead to property damage.
■ The interior light must only be used
to illuminate the interior of the appli-
ance. It is not suitable for lighting a
room.
Switching on
The appliance is switched on as soon as the
mains plug is plugged in. The compressor
starts to work, the refrigerant flows through
the pipes and a quiet humming sound can
be heard.
(13)
SET
TEMPERATURE FAST COOL 2°C 3°C
• Use the temperature controller (1) and the
"Set" button (13) to set the desired cooling
temperature.
If the appliance makes worrying
noises, check the solid base and
remove any objects that may be
on top of the appliance.
(1)
4°C 6°C 8°C
Operation
Switching off
• To switch the appliance off, pull out the
mains plug.

Setting the temperature

WARNING
Health hazard!
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature in the fridge and freezer compart-
ment.
■ Always adhere to the prescribed am-
bient temperature (see data sheet at
the end of this user manual).
Using the "Set" button (13), you can set the
temperature in the fridge compartment.
• First select a medium setting (e.g. 6 °C).
• If, for example in summer, the ambient
temperature increases, so select a lower
setting accordingly.
(9)
Using the temperature controller (9), you can
set the temperature in the freezer compart-
ment. To set
– to a lower temperature, turn the tempera-
ture controller clockwise.
– to a higher temperature, turn the tempera-
ture controller counterclockwise.
Page GB-11