SPORTSTECH SX400 Benutzerhandbuch Seite 43

Target Calories
1. Use joggle wheel to set Target CALORIES (preset
value=100), press STRAT/STOP workout in Target
Calories mode.
2. CALORIES begins to count down from Target value,
TIME/DISTANCE/RPM/SPEED & HEART RATE will
display value accordingly.
3. The character animation only show USER, it will
skip to next figure as per one fifth of the preset
Calories.
4. Press STA T/STOP button to stop workout, STOP
icon is blinking, all value will remain.
5. During workout, it is invalid to press RESET /Joggle
wheel /ENTER button.
6. In STOP mode, press RESET button, monitor return
to function setting page.
Target HR
1. Use joggle wheel to set Target PULSE (preset
value=100), press STRAT/STOP to workout in
Target HR. Mode. Keep both hands hold on hand
grips.
2. TIME begins to count up, DISTANCE/ CALORIES/
RPM/ SPEED & HEART RATE will display value
accordingly.
3. The character animation only show USER, it will
skip to next figure as per 0.1KM (or ML).
4. When actual PULSE value is 50% higher than
Target Pulse, up is flashing to remind user too fast;
When actual PULSEis 50% lower than Target Pulse,
down is flashing to remind user too slow.
5. Press STRAT/STOP button to stop workout, STOP
icon is blinking, all value will remain.
6. During workout, it is invalid to press
RESET /Joggle wheel /ENTER button
7. In STOP mode, press RESET button, monitor return
to function setting page.
43