Managing Calls; Automatic Call Acceptance; Rejecting A Call - Silvercrest SBTF 10 C3 Bedienungsanleitung

Managing calls

If you have connected two mobile phones to the hands-
free kit simultaneously, you can put one call on hold in
order to take a call from a second mobile phone and
toggle between the two calls.
Note:
If a call comes to the second mobile phone during an
ongoing call, this call will only be signalled on the
second phone.
Press the multi-function button
accept the call on the second mobile phone while
already talking on the first mobile phone. The first call
is put on hold.
Press the multi-function button
between the two calls. When the current call is finished,
the hands-free kit switches automatically to the second
ongoing call.
Press the multi-function button
current call and automatically accept the second call.

Automatic call acceptance

If automatic call acceptance is activated in the mobile tel-
ephone, it accepts the incoming call after a determined time
period and then passes it on to the hands-free appliance. Fur-
ther information regarding automatic call acceptance is to be
found in the operating instructions for your mobile telephone.

Rejecting a call

Press the multi-function button
to reject an incoming telephone call.
Adjusting the volume of the hands-free appliance
You can adjust the sound volume level of the hands free
device with the +/- buttons
During a conversation, press the + or - button
desired volume level is set. A high-pitched beep signals
that you have reached maximum volume; a low-pitched
beep signals that you have reached minimum volume.
SBTF 10 C3
twice briefly to
again twice to toggle
once briefly to end the
for about 3 seconds
.
GB
until the
│
13 ■