Cleaning And Maintenance - EuroLite LED SCY-6 RGB DMX Bedienungsanleitung

Channel 6 – Lens 6
Value:
000 – 010
011 – 045
046 – 080
081 – 115
116 – 150
151 – 185
186 – 220
221 – 255
Channel 7 – Strobe
Value:
000 – 010
011 - 255
Channel 8 – Auto Mode: Internal Programs, Sound Controlled Mode
Value:
000 – 010
011 – 024
025 – 038
039 – 052
053 – 066
067 – 080
081 – 094
095 – 108
109 – 122
123 – 136
137 – 150
151 – 164
165 – 178
179 – 192
193 – 206
207 – 220
221 – 250
251 – 255
Channel 9 – Speed in Auto Mode
Value:
000 – 255

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
Function:
Off
Red on
Green on
Blue on
Red and green on
Red and blue on
Green and blue on
Red, green and blue on
Function:
Off
Flash, with increasing speed
Function:
Off
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
Program 9
Program 10
Program 11
Program 12
Program 13
Program 14
Program 15
Program 16
Sound Controlled Mode
Function:
Increasing speed
21/22 00046978.DOC, Version 1.0