Safe Operation - B. Braun Aesculap Spine S4 MIS FW714R Gebrauchsanweisung/Technische Beschreibung

Safe handling and preparation
►
Ensure that the product and its accessories are
operated and used only by persons with the requi-
site training, knowledge, or experience.
►
Read, follow, and keep the instructions for use.
►
Read, follow, and keep the instructions for use for
4
S instruments TA012384.
►
Read, follow and keep the surgical manual for the
S 4 Spinal System instrument set S
4
S MIS and keep it in a safe place.
►
Use the product only in accordance with its
intended use, see Intended use.
►
Remove the transport packaging and clean the new
product, either manually or mechanically, prior to
its initial sterilization.
►
Store any new or unused products in a dry, clean,
and safe place.
►
Prior to each use, inspect the product for loose,
bent, broken, cracked, worn, or fractured compo-
nents.
►
Do not use the product if it is damaged or defec-
tive. Set aside the product if it is damaged.
►
Replace any damaged components immediately
with original spare parts.
►
To avoid damage to the working end: Carefully
insert the product through the working channel
(e.g. trocar).

Safe operation

4 FRI, S 4 SRI and
Pushing the K wire forward
into the aorta risks the life of
the patient!
DANGER
►
When inserting S
or S
guide wire, pay attention
to the markings on the
guide wire.
►
Hold the guide wire with a
forceps.
►
Remove the guide wire at
the right moment.
Positioning implants incor-
rectly causes a serious risk of
injury!
DANGER
The depth markings and scales
on the instruments are only
intended for orientation!
►
Pay attention to the
appropriate reference
points of the markings -
see installation section.
►
Ensure that the implants
are positioned correctly
using an x-ray check.
Risk of injury and/or malfunc-
tion!
►
Always carry out a func-
WARNING
tion check prior to using
the product.
4 implants
4 instruments using the
3