Operation - PeakTech 1030 Bedienungsanleitung

4. Operation

The Voltage Detector is useful for the identifying active and
neutral conductors, finding a break in a wire, and detecting
the presence of AC voltage at:
* Outlets
* Switches
* Circuit breakers
* Fuses
* Wires and cables
Turn unit on:
* Press the power button.
* A single-beep sounds and the green LED in the tip of the
tester starts to light up.
* The tester is now activated and is operational.
* Test on known live circuit to verify tester functionality.
* If you press the power button for 1 second to power on
the device, the audible alarm is deactivated.
Note:
If there is no indication, voltage could still be present.
Operation may be affected by differences in socket design
and insulation thickness and type. The device cannot detect
voltage inside armoured cable or cable in conduit, behind
panels or in metallic enclosures.
Turn unit off:
* Press the power button and listen for a long beep sound
and watch the "power on" green/red LEDs turn off.
* The tester is now deactivated and is not operational.
-17-