Safety Precautions - PeakTech 1030 Bedienungsanleitung

1. Safety Precautions

This product complies with the requirements of the following
directives of the European Union for CE conformity:
2014/30/EU (electromagnetic compatibility), 2014/35/EU
(low voltage), 2011/65/EU (RoHS).
We herewith confirm that this product meets the essential
protection standards, which are given in directions of
council for adaptation of the administration regulations for
UK of Electromagentic Compatibility Regulations 2016 and
the Electrical Equipment (safety) regulations 2016.
Overvoltage category III 1000V / IV 600V; pollution degree2
CAT I: For signal level, telecommunication, electronic with
small transient overvoltage
CAT II: For local level, appliances, main wall outlets,
portable equipment
CAT III: Distribution level, fixed installation, with smaller
transient overvoltages than CAT IV.
CAT IV: Units and installations, which are supplied overhead
lines, which are stand in a risk of persuade of a
lightning, i.e. main-switches on current input,
overvoltage-diverter, current use counter.
To ensure safe operation of the equipment and eliminate
the danger of serious injury due to short-circuits (arcing),
the following safety precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
* Do not use this instrument for high-energy industrial
installation measurement.
* Do not apply more than the rated voltage of max. 1000 V
* Do not use the unit if it is wet or damaged.
-13-