Toyota 06-8FD15F Fahrerhandbuch Seite 23

(1)
(1) Push
(1)
(1) Push
Turn signal switch
Makes the turn signal lamps blink
Left turn .............................. Push forward
Right turn ................................. Pull back
The turn signal switch will operate only
when the ignition switch is ON.
The turn signal lever returns automatically
to the original position following a change
in direction
Electric horn
Press the button in the center of the
steering wheel to sound the horn.
The horn will sound even when the ignition
switch is OFF.
Horn button (Option)
The horn will sound when the button at the
top of the assist grip on the rear pillar of
the driver's protection is pressed. Use this
horn when backing up.
The horn will sound even when the ignition
switch is OFF.
(1)
(2)
(1) Forwards
(2) Reverse
Power selector
Turn the selector to change the
acceleration and hydrostatic braking mode
with the truck in motion (this does not
influence top travel speed or lifting
performance).
Power selection is enabled only with the
travel direction lever in the neutral position
and the truck at standstill.
Mode S (comfort): setting for a smooth
acceleration and hydrostatic braking
response.
Mode P (balanced): setting for an
intermediate level of acceleration and
hydrostatic braking response.
Mode H (performance): setting for a
maximum level of acceleration and
hydrostatic braking response.
Mini-lever
Travel direction lever
Lever to select the forward - reverse
direction of travel.
Forward ............................. Push forward
Reverse............................. Pull backward
The speed of forward and reverse drive is
adjusted by the extent of pressing the
accelerator pedal.
Note:
• Stop the truck before shifting between
forward and reverse direction of travel.
• After the OPS System has been
activated, return the accelerator pedal
and travel direction lever to neutral and
resume the normal seated position
before recommencing operations.
• Always operate the travel direction
lever from a correctly seated position.
• Depending on the truck's specifica-
tions, the position of the lever may vary.
en-23
en