Auto speed control indicator
(Only for DX models with Auto
speed control)
The automatic speed control indicator
appears to inform the operator that speed
limitation based on load height and weight is
in operation.
Function on/off indicator
(Only for DX models with Auto
speed control)
Even when the automatic speed control is
turned off, the screen informs the operator
that
the
function
preventing
sudden
starting is enabled.
Parking brake engaged
indicator
If the operator attempts to start the truck
while the parking brake is engaged, the
truck will not move, the warning light will
blink and a buzzer starts working to alert
the operator.
Caution
Caution
If the warning light does not turn off
even
when
the
parking
brake
disengaged, park and truck and contact
a
Toyota
dealer
to
request
inspection.
1
is
an
Parking brake not engaged
alarm
When the ignition switch is turned to OFF
or the operator leaves the seat while the
parking brake is disengaged, a warning
sound will notify the operator to apply the
parking brake. The alarm will also be
sounded if the operator returns to the
normal seated position and turns the
ignition switch to ON while the parking
brake is disengaged.
Note:
•
On engaging the parking brake, the
buzzer will stop.
•
When leaving the driver's seat, always
shift to neutral, engage the parking
brake, lower the forks, and tilt the mast
forward so the tips will not trip
pedestrians, and lastly turn off the
ignition switch.
Printed circuit board warning
light
If this warning light (1) flashes, it signals
faults with the circuit board. Contact a
Toyota dealer.
en-19
en