General Safety Instructions - Nice elero MVEF 14-R Serie Betriebs- Und Montageanleitung

Intended use | Safety
The product may only be operated by instructed and author-
ised specialist personnel while observing all safety notes.
The safe and error-free use and operational reliability of
the product are only guaranteed when it is used properly
according to the specifications contained in these operating
and assembly instructions.
Use according to its intended purpose includes the obser-
vation and compliance of all safety instructions contained in
these operating instructions as well as all valid trade Acci-
dent Insurance regulations and valid laws on environmental
protection. Use according to its intended purpose also
includes the compliance with all prescribed operating regu-
lations in these operating and assembly instructions.
2.3 Foreseeable misuse
Any use that deviates from the intended use as stated by the
manufacturer, elero GmbH Antriebstechnik (see "Address")
is deemed as foreseeable misuse.
2.4 Warranty and liability
The General Terms and Conditions of the manufacturer,
elero GmbH Antriebstechnik, apply at all times (see "Ad-
dress"). The conditions of sale and delivery are included
in the sales documents and shall be presented to the plant
operator upon delivery. Any liability claims for personal or
material damages are excluded when they can be attributed
to one or more of the following causes:
• Opening the product by the customer
• Improper use of the product
• Improper installation, commissioning or operation of
the product
• Structural modifications to the product without the written
consent of the manufacturer
• Operation of the product with improperly installed con-
nections, defective safety devices or improperly installed
safeguards
• Failure to observe the safety regulations and information
presented in these operating instructions
• Failure to observe the specified technical data
2.5 Customer service provided by
the manufacturer
In the event of a fault, the product may only be repaired by
the manufacturer. The address for sending the product to
Customer Service can be found in the "Address" section.
If you did not purchase the product directly from elero,
please contact the supplier of the product.
3 Safety
3.1

General safety instructions

These operating and assembly instructions contain all the
safety information that must be observed in order to avoid
and prevent danger when working with the product in the in-
dividual life cycles. When all specified safety instructions are
complied with, safe operation of the device is guaranteed.
3.2 Layout of safety instructions
The safety instructions in this document are marked using
hazard and safety symbols and are designed according to
the SAFE principle. They contain information on the type
and source of the danger, possible consequences and on
avoiding danger.
2 | EN
The following table defines the representation and descrip-
tion of hazard levels with possible physical damage as used
in these operating instructions.
Symbol Signal word Meaning
Fig. 1 Notation for personal injuries
The table below describes the pictograms used in these
operating instructions to illustrate the hazard situation in
relation with the symbol for the hazard level.
Symbol Meaning
Fig. 2 Notation for specific danger
The table below defines the representation and description
of situations used in these operating instructions for situa-
tions in which damage can occur to the product or indicates
important facts, conditions, tips and information.
Symbol Signal word
Fig. 3 Notation for damage to property and additional information
© elero GmbH
DANGER Warns about an accident
that will occur if the in-
structions are not followed,
which can lead to fatal, irre-
versible injuries or death.
WARNING Warns about an acci-
dent that may occur if
the instructions are not
followed, which can lead
to serious, possibly fatal,
irreversible injuries or
death.
CAUTION Warns about an acci-
dent that can occur if the
instructions are not fol-
lowed, which can lead to
slight, reversible injuries.
Danger caused by electrical voltage,
electric shock:
This symbol indicates dangers due to
electric current.
Meaning
ATTENTION This symbol warns
against possible damage
to property or equipment.
IMPORTANT This symbol indicates
important facts and
states as well as
referring to further
information in these
operating and as-
sembly instructions. It
also refers to certain
additional instructions,
which provide additional
information or help you
to carry out a procedure
more simply.