Timer/Kitchen Timer - Atag IG9571MB Gebrauchsanweisung

Table continued from last page
The standby mode
The childproof lock mode
The pause mode

Timer/kitchen timer

NOTE!
There's one timer/kitchen timer available per cooking zone.
The timer/kitchen timer can only be linked to one of both cooking zones per set of two cooking
zones.
The timer/kitchen timer function can also be used without activating an accompanying cooking
zone.
The timer function
This function can be recognized
by the red small arrow pointing up.
The time increases in the timer
function.
The timer cannot be linked to a
cooking zone.
When the timer button is pressed,
the timer function automatically
switches on after 3 seconds if you
do nothing.
Switching on the timer
1. Press the timer/kitchen timer button from the cooking zone once.
The display of the timer lights up and you'll see three zeroes
flashing. A + and - appear below.
If you do not set a time with the + or - button, the timer will start
running automatically after 3 seconds. The timer can go as far as
9 hours and 59 minutes. The red arrow pointing upwards lights up
and the time increases.
2. Press the timer/cooking timer button again to switch it off.
Not a single light is lit.
The red light next to the key button is lit
constantly.
The red light next to the pause button flashes.
The kitchen timer function
This function can be recognized
by the red small arrow pointing
down.
The time decreases in the kitchen
timer function.
The kitchen timer can be linked to
a cooking zone. This means the
cooking zone switches off if the set
time has passed.
The kitchen timer function can be
reached from the timer function by
pressing the red + button or red -
button.
Operation
21