Herunterladen Diese Seite drucken

Repairing; Troubleshooting - Stihl RMA 443.2 VC Gebrauchsanleitung

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
English
► If anything is unclear: consult a STIHL special‐
ist dealer.

20 Repairing

20.1
Repairing the Mower and Bat‐
tery
The mower, blade and battery cannot be
repaired by the user.

21 Troubleshooting

21.1
Remedying Lawn Mower or Battery Faults
Fault
LEDs on the
battery
The lawn mower
1 LED flashes
does not start
green.
when switched
on.
1 LED illumina‐
tes red.
3 LEDs flash
red.
3 LEDs illumi‐
nate red.
4 LEDs flash
red.
Self-propulsion is
not working.
44
► If the mower or the blade is damaged: Do not
use your mower and contact your STIHL serv‐
icing dealer for assistance.
► If the battery has a malfunction or is damaged:
Replace the battery.
► If safety labels are illegible or damaged: Have
the labels replaced by a STIHL servicing
dealer.
Cause
The battery charge
state is too low.
The battery is too
warm or too cold.
There is a fault in the
lawn mower.
The lawn mower is
too warm.
There is a fault in the
battery.
The electrical connec‐
tion between the lawn
mower and battery
has been interrupted.
The lawn mower or
battery is damp.
The resistance at the
blade is too great.
The area around the
blade is blocked.
There is a fault in the
self-propulsion
mechanism.
Remedy
► Charge the battery.
► Pull out the activation key.
► Remove the battery.
► Allow the battery to cool down or warm
up.
► Pull out the activation key.
► Remove the battery.
► Clean the electric contacts in the battery
compartment.
► Fit the battery.
► Switch the lawn mower on.
► If 3 LEDs still flash red: do not use the
lawn mower and consult a STIHL spe‐
cialist dealer.
► Pull out the activation key.
► Remove the battery.
► Allow the lawn mower to cool down.
► Remove the battery and fit it again.
► Switch the lawn mower on.
► If 4 LEDs still flash red: do not use the
battery and consult a STIHL specialist
dealer.
► Pull out the activation key.
► Remove the battery.
► Clean the electric contacts in the battery
compartment.
► Insert the activation key.
► Fit the battery.
► Pull out the activation key.
► Remove the battery.
► Clean the lawn mower.
► Allow the lawn mower or battery to dry.
► Set a higher cutting height.
► Switch the lawn mower on in lower
grass.
► Clean the lawn mower.
► Consult a STIHL specialist dealer.
20 Repairing
0478-131-9948-D

Werbung

loading

Diese Anleitung auch für:

Rma 443.2 pvRma 448.2 vcRma 448.2 pv