SUBLIMED actiTENS Gebrauchsanleitung Seite 98

Table 3: Recommended separation distances between portable and mobile RF communications
equipment and the
actiTENS
MAXIMUM RATED
OUTPUT POWER OF
THE EMITTER W
0.01
0.1
1
10
100
For emitters for which the maximum rated output power is not given above, the recommended
separation distance d in metres (m) can be determined from the equation applicable to the emitter
frequency, where P is the transient maximum output power of the emitter in watts (W) according
to the manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the highest frequency range applies.
NOTE 2: These directives may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection form structures, objects and people..
98
SEPARATION DISTANCE ACCORDING TO EMITTER FEQUENCY M
FROM 150 KHZ TO
80 MHZ
D=1.2 √P
0.12
0.38
1.2
3.8
12
80 MHZ TO 800 MHZ
D=1.2 √P
0.12
0.38
1.2
3.8
12
FROM 800 MHZ TO
2.7 GHZ D=2.3 √P
0.23
0.73
2.3
7.3
23
SBM1AL001 – Notice_202105_v8