Herunterladen Inhalt Inhalt Diese Seite drucken

SUBLIMED actiTENS Gebrauchsanleitung Seite 97

Vorschau ausblenden Andere Handbücher für actiTENS:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

IMMUNITY TESTS
Near field emitted
by RF wireless
communications
equipment.
CEI 610004-3
NOTE 1 : At 80 MHz and 800 MHz, the highest frequency range applies..
NOTE 2 : These directives may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection form structures, objects and people.
The field intensities of fixed emitters, such as telephone base stations (cellular/cordless) and
a
terrestrial mobile radios, amateur radio, AM and FM transmission and TV transmission cannot
be predicted theoretically with any accuracy. To assess the electromagnetic environment due
to fixed RF emitters, an on-site electromagnetic investigation should be carried out. If the
field intensity, measured at the location where the
RF compliance level above, the
is normal. If abnormal performance is observed, extra measures may be required such as
reorienting or repositioning the actiTENS.
Over the reference range of frequencies from 150 kHz to 80 MHz, field intensities should be
b
lower than 3 V/m and 6 V/m for the ISM bands.
TEST LEVEL
IEC 60601-1-2
The equipment
The equipment must
must not be used
not be used at a
at a distance
distance of <30 cm
of <30 cm from
from another Service
another electronic
electronic device:
device Services:
TETRA 400, GMRS
TETRA 400, GMRS
460, FRS 460, LTE
460, FRS 460, LTE
Band 13, 17, GSM
Band 13, 17, GSM
800/900, TETRA 800,
800/900, TETRA
iDEN 820, CDMA 850,
800, iDEN 820,
LTE Band 5, GSM
CDMA 850, LTE
1800, CDMA 1900,
Band 5, GSM 1800,
GSM 1900, DECT,
CDMA 1900, GSM
LTE Band 1, 3, 4, 25,
1900, DECT, LTE
UMTS, Bluetooth,
Band 1, 3, 4, 25,
WLAN, 820.11 b/g/n,
UMTS, Bluetooth,
RFID 2450, LTE Band
WLAN, 820.11
7, WLAN 802.11 a/n
b/g/n, RFID 2450,
In compliance with
LTE Band 7, WLAN
the levels required by
802.11 a/n
standard 60601-1-2
In compliance with
the levels required
by standard
60601-1.-2.
should be observed to make sure that functioning
actiTENS
LEVEL OF
COMPLIANCE
The
been tested and
found compatible in
the corresponding
environments.
is used, exceeds the applicable
actiTENS
ELECTROMAGNETIC
ENVIRONMENT-
DIRECTIVES
has
actiTENS
97

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis