Indicator Light; How To Stop A Stimulation; Uninstalling The Device; Monitoring Your Treatment - SUBLIMED actiTENS Gebrauchsanleitung

14. STOPPING THE STIMULATION SESSION
ƒ Stopping at the end of a session: the stimulation session is automatically stopped at the end of
the programmed duration. A message is displayed confirming the end of the session.
ƒ Stopping during a session:
• A session that is running can be stopped temporarily or definitively.
To stop temporarily, use the Pause button (
To stop definitively, use the Stop button (
confirming the end of the session.
• You can also stop a session by pressing the
recommended because records of the session running will be incomplete.
15. REMOVING THE DEVICE
Before removing the device, make sure that no session is running. The indicator light should be
flashing green or off.
INDICATOR
LIGHT
Flashing green
Permanent yellow
Carefully peel off the electrodes and the adhesive pad and place them on their plastic film before
putting them in their bag.
The leads can be removed from the
connectors (do not pull on the leads).
16. FOLLOWING UP YOUR TREATMENT
The app saves the stimulation sessions monitoring data on your telephone together with your pain
level history. Each point or section on the bar is interactive and allows you to access the details of
your sessions. If you have entered one or more pain areas, their history will be saved.
This information can be shared with your healthcare professional during follow-up consultations so
that your treatment can be analysed and adapted if necessary.
). In the latter case, a message is displayed
actiTENS
MEANING
on without any session
actiTENS
running or on pause.
6Session running
together with the electrode by carefully unclipping the
actiTENS
).
ON/OFF button. This option is not
ACTION
You can remove it.
Pause or stop the session
before removing.
The indicator light changes
to flashing green.
71