Dimmer Timer Function; Setting The Time Format; Sleep Timer Function; Alarm Function - Medion LIFE E66567 Bedienungsanleitung

11.4. Dimmer timer function

When the dimmer timer function is activated, the display lighting of your radio is
automatically dimmed between 11 pm and 6 am.
Proceed as follows to switch the dimmer timer function on or off:
 In the settings menu, select the DT subitem and confirm your selection by
pressing the controller or the
 Turn the controller or press one of the VOL+ / VOL buttons on the remote
control to select the desired setting:
ON = function is activated/OFF = function is deactivated.
 Finally, press the controller or the
save your setting.

11.5. Setting the time format

 In the settings menu, select the 24H or 12H subitem and confirm your
selection by pressing the controller or the
control.
The 24H/12H indicator flashes.
 Turn the controller or press one of the VOL+ / VOL buttons on the remote
control and select the desired time format (24-hour display 24H or 12-hour
display 12H).
 Press the controller or the
setting.

12. Sleep timer function

With the sleep timer (AOT – automatic OFF timer), the radio remains on for a specific
period of time (between 5 and a maximum of 120 minutes) and switches to standby
mode when the set time runs out.
 Press the AOT/EQ
AOT flashes on the display and the currently selected timer time is shown.
 Press the AOT/EQ
the remaining time until the radio switches off.
The activated sleep timer is indicated on the display by the AOT indicator.
 During the activated sleep timer, press the
on the remote control to display the remaining time until switch-off.
 Select OFF to deactivate the sleep timer function.

13. Alarm function

You can programme two alarm times (AL1 and AL2) that are set independently of
one another.
66
button on the remote control to save your
button or the AOT button on the remote
button or AOT on the remote control
button on the remote control.
button on the remote control to
button on the remote
several times to select
button or the AOT button
AOT/EQ
control.