Benning CM 1-2 Bedienungsanleitung Seite 14

Digital current clamp multimeter for
- DC voltage measurements ( BENNING CM 1-2)
- AC voltage measurements ( BENNING CM 1-2)
- AC current measurements
- resistance measurements ( BENNING CM 1-2)
- continuity tests ( BENNING CM 1-2)
Table of contents
1. User instructions
2. Safety instructions
3. Scope of delivery
4. Device description
5. General information
6. Ambient conditions
7. Electricalspecifications
8. Measuring with the BENNING CM 1-1/ 1-2
9. Maintenance
10. Technical data of measuring accessories ( BENNING CM 1-2)
11. Environmental note
1. User information
This operating manual is intended for
- skilled electricians and
- electrotechnically trained personnel
The BENNING CM 1-1/ 1-2 is intended for measurements under dry ambient
conditions. It must not be used in electrical circuits with a nominal voltage higher
than 600 V DC and 600 V AC (see section 6 "Ambient conditions" for details).
The following symbols are used in this operating manual and on the
BENNING CM 1-1/ 1-2:
Application around and removal from HAZARDOUS LIVE conductors
is permitted.
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to
persons.
Important, must comply with documentation! This symbol indicates

that the information provided in the operating manual must be com-
plied with in order to avoid risks.
This symbol on the BENNING CM 1-1/ 1-2 indicates that the

BENNING CM 1-1/ 1-2 is equipped with protective insulation (pro-
tection class II).
This symbol appears on the display to indicate a discharged bat-
tery.
This symbol designates the "continuity test" field.
The buzzer is intended for acoustic result output.
(DC) direct voltage

(AC) Alternating voltage or current
Ground (voltage against ground)
09/ 2013
Operating manual
BENNING CM 1-1/ 1-2
BENNING CM 1-1/ 1-2

8