Beurer ANTELOPE TECHWEAR Benutzerhandbuch Seite 41

Problem POSSIBLE CAUSE
GPS is not activated on
your Android device
Bluetooth connection
was not established via
BOOSTER will not
ANTELOPE.APP
connect to
ANTELOPE.APP
Bluetooth compatibility
issues
Stimulation of all musc-
le groups has been
increased at once
The stimulation
is too strong in
some areas and
too weak in
Skin Condition varies
others
Defect electrode
ANTELOPE - part of the Beurer group - BEURER GmbH
SOLUTION
Activate GPS on your Android device.
Always establish Bluetooth connection within the ANTELOPE.APP, not via the Bluetooth search on
your device.
• Close or reinstall the app in task manager.
• Log in.
• Start the search for your BOOSTER.
• Turn on the BOOSTER.
• Tap once on the displayed BOOSTER.
• If a connection is still not possible, clear the Bluetooth cache and restart the search.
Deselect the muscle groups from the ANTELOPE.APP and adjust accordingly.
DANGER SWITCH OFF the BOOSTER and APPLY ANTELOPE. SPRAY directly to the electrodes in
the textile. Then restart the ANTELOPE.APP and make sure that all intensity levels are set to 0. Once
this process is completed, restart using your ANTELOPE.TECHWEAR according to the instructions in
this manual. (see 8.1).
Please contact our Customer Care-Team.
39