Antelope.app; Antelope.spray; Booster Charging Cable - Beurer ANTELOPE TECHWEAR Benutzerhandbuch

7.7 ANTELOPE.APP

The ANTELOPE.APP acts as an alternative external control sys-
tem to regulate the stimulation of ANTELOPE.TECHWEAR.
Without connecting the ANTELOPE.APP with the ANTELOPE.
BOOSTER it is not possible to begin electrical stimulation.
The following stimulation programs are available via the ANTE-
LOPE.APP:
Endurance
Frequency 40 Hz
Impulse Wide 400 µs
Impulse Typ Contrast

7.8 ANTELOPE.SPRAY

The electrode contact spray is a conductive liquid which, when
used, can improve the conductivity between the electrodes and
the skin.
Application: Spray the electrodes with the spray. 1-2 sprayers
are sufficient. Hold the bottle vertically and spray the electrodes
with a distance of approx. 15 cm between the spray head and
the electrode.
Ingredients: (CTFA): NA, K, Mg, NH, CL,So Ca, NCR
ANTELOPE - part of the Beurer group - BEURER GmbH
Strength Massage
60-100 Hz 60 Hz
350 µs 200 µs
4-second 2,5 seconds
interval stimulation 1
second ramp

7.9 BOOSTER Charging Cable

The BOOSTER Charging Cable is a micro USB cable which con-
nects to the ANTELOPE.8C-and ANTELOPE.2C-BOOSTER for the
purpose of charging.
33