Antelope.tank-Top; Antelope.calf-Guards; Antelope.2C-Booster - Beurer ANTELOPE TECHWEAR Benutzerhandbuch

7.4 ANTELOPE.TANK-TOP

The fabric of the ANTELOPE.TANK-TOP consists of 54% polyam-
ide, 36% polypropylene and 10% elastane.
The ANTELOPE.TANK-TOP includes four silicone electrodes inte-
grated into the compression fabric. Magnetic buttons attached
to the ANTELOPE.SUIT enables the textile to be connected with
the ANTELOPE.2C-BOOSTER with external cables.
The ANTELOPE.TANK-TOP is only intended for training the abdo-
men and back.

7.5 ANTELOPE.CALF-GUARDS

The fabric of the ANTELOPE.CALF-GUARDS consists of 54% poly-
amide, 36% polypropylene and 10% elastane.
The ANTELOPE.CALF-GUARDS include two silicone electrodes in-
tegrated into the compression fabric. Magnetic buttons attached
to the ANTELOPE.CALF-GUARDS enables the textile to be con-
nected with the ANTELOPE.2C-BOOSTER with external cables
The ANTELOPE.CALF-GUARDS are only intended for training the
calves.
ANTELOPE - part of the Beurer group - BEURER GmbH

7.6 ANTELOPE.2C-BOOSTER

The ANTELOPE.2C-BOOSTER is the energy source of the AN-
TELOPE.TANK-TOP and ANTELOPE-CALF-GUARDS. The ANTE-
LOPE.2C-BOOSTER is equipped with a rechargeable lithium-ion
battery.
The stimulation intensity is adjustable by pressing the [+/-] but-
ton on the BOOSTER.
• By pressing [+] you increase the intensity of all channels by
one unit
• By pressing [-] you decrease the intensity of all channels by
one unit
The ANTELOPE.2C-BOOSTER should be charged using the Boost-
er Charging Cable and a standard USB-Charger.
The ANTELOPE.2C-BOOSTER is intended only to power and reg-
ulate the electrical stimulation for the ANTELOPE.TANK-TOP and
ANTELOPE.CALF-GUARDS.
32