Electrical Connection - Saunum Primary Set Bedienungs- Und Installationsanleitung

ELECTRICAL
CONNECTIONS
7. Connect the sauna climate device to the
control device.
The electrical connection of the device
must be performed by a qualified per­
son in accordance with the applicable
standards and requirements.
The sauna climate device must be con-
nected in a half stationary position to the
junction box on the wall of the sauna room.
The junction box must be splashproof and
its maximum height from the floor can be
up to 500 mm. The connection cable must
be a rubber insulated type H07RN-F cable
or equivalent. To access the device electrical
connections, it is necessary to open the bot-
tom panel. To open the panel, completely
loosen the two bolts under the device (see
figure below).
30
yellow/green
blue
31