Information On The Engine; Warranty; Ce Declaration Of Conformity; Environmentally Friendly Disposal - MTD Cub Cadet Zero Turn 17CIDGHB603 Originalbetriebsanleitung

Information on the engine

Problem
Starter does not turn.
Starter turns but engine
does not start.
Engine emits smoke.
Strong vibrations.
Cutter deck does not
discharge grass or cuts
unevenly.
Engine is running, cutter
deck is not mowing.
Information on the engine
The engine manufacturer is liable for all engine-
related problems with respect to power, power
measurement, technical specifications, warranty and
service.
Information can be found in the owner's/user
handbook supplied separately by the engine
manufacturer.

Warranty

The warranty rules issued by our company or the
importer apply to every country. As part of the
warranty, we remedy malfunctions on your device
free of charge provided that this malfunction is
caused by a material or manufacturing defect.
Should you need to call upon the warranty, please
apply to the vendor of your machine or to the
nearest agency.
Possible cause
Discharged or low battery.
Fuse has tripped.
Loose earth cable between engine and
frame.
Choke and throttle in wrong position.
Carburettor not receiving any fuel, fuel
tank empty.
Defective or dirty spark plug.
No ignition spark.
Too much engine oil in the engine.
Engine defective.
Damaged blade shaft or defective cutter.
Engine speed too low.
Travelling speed too high.
Cutting blade is blunt.
V-belt torn.
Remedy
Check and charge the battery.
If necessary, replace the battery.
Replace the fuse.
If the fuse trips repeatedly, look for the
cause (usually short-circuit).
Connect the earth cable.
Actuate the choke. Set the throttle
to .
Top up fuel.
Check the spark plug (see engine
manual).
Arrange for the ignition to be checked in
a service centre.
Switch the device off immediately.
Check the engine oil level.
Switch the device off immediately.
Have the engine checked in a service
centre.
Switch the device off immediately.
Have defective parts replaced in a
service centre.
Put your foot down further on the ac-
celerator.
Choose a lower driving speed.
Have the cutting blades sharpened or
replaced by a service centre.
Have the V-belt replaced in a service
centre.

CE declaration of conformity

Further details on the device can be found
on the separately enclosed CE declaration
of conformity that forms an integral part of
this operating manual.

Environmentally friendly disposal

Dispose of packaging remnants, old
mowers, etc. in accordance with local
regulations.
EN
27