Installation Guidance; Installation Reminder - poolstar POOLEX Skyline FI 75 Installations Und Gebrauchs Anleitung

D. Installation guidance

1. Installation reminder

Only a professional staff is allowed to install the heat pump. The users are not qualified to install by themselves,
otherwise the heat pump might be damaged and risky for users' safety.
a. Location and water pipe connection
The inverter pool heat pump should be installed in a good ventilation place.
1) The frame must be fixed by bolts (M10) to concrete foundation or brackets. The concrete foundation must be
solid and fastened; the bracket must be strong enough and antirust treated;
2) Please don't stack substances that will block air flow near inlet or outlet area, and there is no barrier within
50cm behind the main machine, or the efficiency of the heater will be reduced or even stopped;
3) The machine needs an appended pump (Supplied by the user). The recommended pump specification-flux:
refer to Technical Parameter, Max. lift ≥10m;
10