Operation Instruction - poolstar POOLEX Skyline FI 75 Installations Und Gebrauchs Anleitung

2.Operation Instruction

a. Screen Lock
1) Press " " for 3 seconds to lock or unlock the screen
2) Automatic Lock Period: 30 seconds if no operation
b. Power On
Press " " for 3 seconds to unlock screen, Press "
c. Temperature Setting
Press " " and "
d. Mode Selection
1) Press to switch among heating
Heating mode
Cooling mode
Automatic heating/cooling mode: Water setting range (12~40℃)
When water inlet temperature is higher than setting point, automatic cooling mode starts
When water inlet temperature is lower than setting point, automatic heating mode starts
2) Press " " to switch among boost mode
Default mode: Boost
Please choose boost mode
e. Defrosting
a. Automatic defrosting: When machine is defrosting, "
b. Forced defrosting: When machine is heating and the compressor is working continuously for 10 minutes,
In heating mode, press
defrosting, is flashing and defrost starts,
(Remarks: the interval between forced defrosting should be more than 30 minutes.)
Attention：The controller has power-down memory function.
" to display and set temperature.
: Water setting range (18-40℃)
: Water setting range (12~30℃)
for initial heating
and
" to power on machine.
, cooling and automatic mode
, silence mode
" flashing; after defrosting"
on touch controller simultaneously for 5 seconds to start forced
stop flashing and defrosting stops.
14
.
" stop flashing.