Device Disposal; Packaging Disposal - FLAEM LightNeb Bedienungsanleitung

11 - SYMBOLS
Positive batteries polarity
Negative batteries polarity
Type BF applied parts
WARNING! Check the
instructions for use
Direct current
Medical CE Marking ref. Dir.
93/42 EEC and subsequent
updates
Minimum and maximum
room temperature
Minimum and maximum
atmospheric pressure

12 - DEVICE DISPOSAL

In compliance with the Directive 2012/19/EC, the symbol printed on the de-
vice shows that the device to be disposed of is considered waste and must
therefore be a "separate collection" item. Consequently, the user must take
said waste (or have it taken) to the designated collection facilities arranged
by the local authorities, or hand it to the retailer when purchasing an equivalent
new device. Separate waste collection and the subsequent treatment, recycling
and disposal procedures promote the production of devices made with recycled
materials and limit the negative effects on the environment and on health caused
by potential improper waste management. If the user disposes of the product in an
unauthorised manner, administrative penalties shall be applied according to the
transposition laws of directive 2012/19/EC of the member state or country where
the product is disposed of.
13-

PACKAGING DISPOSAL

20 Product box
PAP
07
Product packaging bag
O
Battery disposal: Spent batteries
must be disposed of in appro-
priate containers.
Manufacturer
Protection rating of the cas-
ing: IP21.
(Protected against solid foreign
IP21
objects larger than 12mm.
Protected against access with a
finger; Protected against verti-
cally dripping water).
Device serial number
Warning
Minimum and maximum air
moisture
03 Heat-shrinkable battery film
PVC
05
Heat-shrinkable accessories film
PP
29