Operating Modes; Custom Mode - Steinberg Systems SBS-MD-12 Bedienungsanleitung

INTERNAL SPEAKER
The internal speaker can be turned off by connecting headphones to the device. The
6.3 mm headphone plug should be connected to the socket on the back of the control
panel. It is recommended to connect headphones with volume control.

OPERATING MODES

The device has 4 operating modes:
1. SENS.
It is used to adjust the sensitivity. Increase or decrease the sensitivity level with the
"+" or "-" buttons.
Note! To detect a deeply embedded target, set the sensitivity to a high level but not
the highest. Setting the device to the highest sensitivity level will cause it to receive
signals from broadcast antennas or other telecom lines.
2. ELIM.
Eliminates an unwanted target using CUSTOM mode.
3. PINPOINT [PP]
Precision search mode. It accurately pinpoints the target's location.
4. BACKLIGHT
Adjusts the brightness of the backlight. Touch the backlight button and use the "+" or
"-" buttons to increase or decrease the backlight intensity. The range of the backlight
brightness is 0-9. The brightness level appears on the display.
Note! The device saves all the settings before turning off the power.
OPERATING MODES CORRESPONDING TO THE TARGETS SEARCHED
The device has 5 operating modes that correspond to the targets you want to find.
1. JEWELRY MODE
This does not mean that the device will only detect jewelry. In the JEWELRY mode, the
discrimination range is set to ignore larger nails and small pieces of metal when
searching.

2. CUSTOM MODE

The discrimination range for this mode is set by the user. By using the "+" or "-"
buttons, you can select targets that you don't want. When the device lights up over an