Steinberg Systems SBS-MD-12 Bedienungsanleitung Seite 44

Control panel
MODE: Allows the user to select the device operating mode (The metal detector has
three operating modes: DISC; ALL-METAL; NOTCH-DISC)
SET: Using the SET button you can select the SENS or DISC / NOTCH mode on the
display.
ACC / REJ: This function in the NOTCH mode allows you to accept or reject targets that
were set in the elimination mode.
- / +: With these buttons you can increase or decrease the discrimination range of the
device.
GND TRAC: Finds a buried metal object. This function only works in ALL-METAL mode.
VOL: the ON / OFF switch, also used to adjust the volume of the device.
GND BAL: Compensates for the mineralization effect in ALL-METAL mode. Start
searching for a target by turning the GND BAL knob to P.
PHONE: Headphone socket - If you want to disconnect the internal speaker, push a
3.5mm headphone plug into the socket.
Display