Solving Problems; Care And Cleaning - Gastroback 42538 Design Multicooker Advanced Bedienungsanleitung

SOLVING PROBLEMS

Problem
The multicooker suddenly swit-
ches off.
The multicooker has switched to
KEEP WARM setting before coo-
king is complete.

CARE AND CLEANING

• Unplug the power cord from the power outlet.
• Allow all parts to cool before removing the removable cooking bowl. Wash the
removable cooking bowl, stainless steel steaming tray and glass lid in hot, soapy
water, rinse and dry thoroughly.
• Gastroback does not recommend that any parts of your multicooker are washed
in a dishwasher as harsh detergents and hot water temperatures may stain or dist-
ort the removable cooking bowl and accessories. The glass lid is dishwasher safe.
• Do not use abrasive cleaners, steel wool, or metal scouring pads as these can
damage the non-stick surface.
• The housing can be wiped over with a damp cloth and then dried thoroughly. To
prevent damage to appliance do not use alkaline cleaning agents when cleaning,
use a soft cloth and a mild detergent.
Note:
If rice has cooked onto the bottom of the removable cooking bowl, fill the bowl
with hot, soapy water and leave to stand for approximately 10 minutes before
cleaning.
The appliance connector must be removed before the multicooker is
WARNING:
cleaned and that the appliance inlet must be dried before the multicooker is used
again.
To prevent damage to the multicooker do not use alkaline cleaning agents when
cleaning, use a soft cloth and mild detergent.
Do not use chemicals, steel wool, metal scouring pad or abrasive cleaners to clean
the outside of the multicooker housing or cooking bowl as these can damaged the
housing or the coating of the cooking bowl.
Do not immerse housing or power cord in water or any other liquid as this may cau-
se electrocution.
All manuals and user guides at all-guides.com
Solution
• Ensure power plug is connected properly to the appliance and to power outlet.
• The appliance has been stressed or has overheated due to cooking conditions.
Push the desired cooking button and then the START|CANCEL button to reset
and continue cooking.
Allow a few minutes for appliance to reheat and continue cooking.
• Press the START|CANCEL button to reset. Then, select the desired cooking
method to continue cooking.
61