Device Operation; Connecting A Carrying Strap To The Device; Replacing The Rubber Foam Seal; Change Filter - probst FXAH-120-GRABO-GREENLINE Betriebsanleitung

Operation
4.2

Device operation

4.2.1

Connecting a carrying strap to the device

•
The four metal eyelets around the handle are
used to attach the lifting carrying strap.
•
Secure one of the buckles (at each end of
the strap) in an eyelet provided for this
purpose.
•
Carrying strap can be placed around the
operator's shoulder for load support.
4.2.2

Replacing the rubber foam seal

•
Remove the damaged or used rubber foam seal
by pulling it out.
•
Carefully press the new rubber foam seal into
position.
4.2.3

Change filter

•
Use the tip of a screwdriver to remove the
plastic plug (ring) and filter on the bottom of
the device.
•
Insert a new filter (or cleaned filter) and push
the plastic plug (ring) back in to secure the
filter.
58500016 11 / 16 GB