H) Switching The Operating Mode - Sygonix 396430 Bedienungsanleitung

h) Switching the Operating Mode

Start the programming mode as described in chapter 8. a). The yellow LED must
be lit.
You can choose between two operating modes:
• Regular mode:
After input of the correct user code, the relay is activated for the programmed
time (see chapter 8. e) and then deactivated again automatically.
*52 0
Example:
• Switching mode:
The switching code is active in addition to the regular mode (see description
above). After input of the switching code (for programming, see chapter 8. i),
the relay is activated permanently. Only entering the switching code again will
deactivate the relay again.
While the relay is activated via the switching code, other user code input will
be ineffective! The relay can only be deactivated again with the switching
code, but not with any of the present user codes!
*52 1
Example:
If desired, you can programme other settings now or leave the programming
mode with the pound key (#).
34
The home technology brand for the entire house. More information at www.sygonix.com