D) Deleting Memory/User Code - Sygonix 396430 Bedienungsanleitung

d) Deleting Memory/User Code

This programming deletes one of the 99 user code memory slots or the con-
tained user code.
You can also delete all 99 memory slots/user codes at once (enter memory slot
number "00").
Start the programming mode as described in chapter 8. a). The yellow LED must
be lit.
Then enter:
*50 XX (XX = memory slot no. 00...99)
Example 1:
The memory slot "35" and the user code in it are deleted.
Example 2:
All 99 memory slots and the user code in them are deleted.
If desired, you can programme other settings now or leave the programming
mode with the pound key (#).
30
The home technology brand for the entire house. More information at www.sygonix.com