Operation; Fuse Replacement; Technical Data - Renkforce T-701B Bedienungsanleitung

Operation

(1) ON/OFF switches the monitor on/off
(2) MODE switches between different screen settings
DEFAULT Basic settings
VIVID High-contrast screen setting
SOFT Soft screen setting
LIGHT Bright screen setting
USER Personal screen setting
(3) "-" turns the volume down or changes settings in the menu
(4) MENU is used to access the menu – the menu points are accessed by pressing several times, settings
are performed via the "-" and "+" keys
BRIGHT Brightness adjustment
CONTRAST Contrast adjustment
COLOR Colour adjustment
VOLUME Volume adjustment
SOURCE Selection of the input: VIDEO 1 IN/VIDEO 2 IN
MODE Switching of the display format (16:9/4:3)
TCON Refl ection and/or rotation of the screen display
RESET Restoring factory settings
(5) "+" turns the volume up or changes the settings in the menu
(6) AV IN for the connection of external AV devices
(7) Headphone socket
(1) POWER switches the monitor on/off
(2) VIDEO SELECT switches the video input (VIDEO 1 IN/VIDEO 2 IN)
(3) turns the volume up or changes the settings in the menu
(4) MENU is used to access the menu – the menu points are accessed by pressing several times, settings
are performed via the "- or " and "+ or
(5) turns the volume down or changes the settings in the menu
(6) MODE SELECT switches between different screen settings (see above for features)
All manuals and user guides at all-guides.com
" keys (see above for features)

Fuse replacement

If it becomes necessary to replace a fuse, make sure that only fuses of the prescribed type and nominal
current are used (see "Technical Data").
You must not carry out your own repairs to fuses or bridge the fuse holder.
• Disconnect the monitor from the power supply.
• Open the fuse holder in the lead wire.
• Remove the defective fuse and replace it with a fuse of the same type.
• Close the fuse holder again.
• Only then the monitor should be re-connected to the car system and put into operation.
• Should the fuse trigger again, have the device repaired in a specialist workshop.
Disposal
a) Product
Electronic devices are recyclable waste materials and must not be disposed of in the household
waste!
Please dispose of the product, when it is no longer of use, according to the current statutory
requirements.
Remove the battery in the remote control and dispose of it separately from the product.
b) Batteries and Rechargeable Batteries
The end user is legally obliged (Battery Regulation) to return used batteries and rechargeable batteries. Do
not dispose of used batteries in the household waste!
Contaminated batteries/rechargeable batteries are labelled with these symbols to indicate that
disposal in the domestic waste is forbidden. The symbols for the relevant heavy metals are:
Cd=Cadmium, Hg=Mercury, Pb=Lead (marking can be seen on the battery/rechargeable bat-
tery, e.g., underneath the rubbish bin symbol shown on the left).
You can return used batteries/rechargeable batteries free of charge to any collecting point in your local com-
munity, in our stores or in any other store where batteries/rechargeable batteries are sold.
You thereby fulfi l your statutory obligations and contribute to the protection of the environment.

Technical Data

Operating voltage ..........................................12 V/DC
Power consumption .......................................300 mA
Battery for remote control ..............................3 V lithium button cell CR2025
Fuse ...............................................................T2AL/250V (5 x 20 mm)
Display size ...................................................17.8 cm (7")
Display format ................................................16:9
Defi nition ........................................................480 x 234
TV format .......................................................PAL/NTSC
Dimensions (without mounting frame) ...........172 x 114 x 24 mm
Installation opening ........................................177 x 120 mm
Mounting depth ..............................................18 mm
Range of operating temperature ....................0 – 50 °C
Weight ...........................................................300 g
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfi lming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2012 by Conrad Electronic SE.