Operation - Renkforce T-M1010 Bedienungsanleitung

Do not attach this connection to continuous current since this could empty the on-
board battery during prolonged vehicle standstill times.
• If you have connected a rear view camera to the V2 RCA jack, connect the green line REVERS-
ING WIRE to a terminal which only carries voltage when the reverse gear is engaged.
This control automatically switches the video input to input V2 (signal of the rear-view
camera) when the reverse gear is engaged. For instance it can only be connected to
the line of a reversing light.
• If you only want to temporarily connect a playback device to the monitor connect the AV output
of this with the adapter line attached (yellow = video, red = audio).
• Then insert the jack plug of the adapter cable into the connection socket below right on the front
of the monitor.
The V1 cinch connection is deactivated as long as the adapter cable is plugged in.

Operation

Buttons on the monitor
• The button switches the monitor on or off.
• The MENU button displays the settings menu. Select the adjustable option by pressing the but-
ton several times.
The option selected with the MENU button is changed with the S and F buttons.
The volume is changed when the S and F buttons are pressed without first pressing the MENU
button.
Menu options:
BRIGHT = Brightness
CONTRAST = Contrast
COLOR = Color
VOLUME = Volume
MODE 16:9 / 4:3 = aspect ratio
TCON = Screen rotation or screen reflection
LANGUAGE = menu language
RESET = resetting factory settings
• The CH1 button activates the AV1 input (audio and video signal of the V1 connection).
• The CH2 button activates the AV2 input (audio and video signal of V2 connection).
• The MODE button retrieves preset picture settings:
STANDARD = normal, natural picture
SOFT = soft pictures with pale colors
SHARP = sharp picture with high contrast colors
LIGHT = bright picture
Buttons of the remote control
If you want to control the monitor with the remote control, point the front of the remote
control to the small IR window on the right next to the MODE button on the monitor.
• The POWER button switches the monitor on or off.
• The MENU button displays the settings menu.
The option activated via the MENU button is changed with the
The volume is changed if the and
button.
The menu options are the same as described under "Buttons on the monitor / menu options".
• The VIDEO SELECT button selects the AV1 or AV2 input.
• The MODE SELECT button calls up preset picture settings. The picture settings are the same as
described under "buttons on the monitor / button MODE".
and buttons.
buttons are pressed without first pressing the MENU
Maintenance and cleaning
Only use a slightly damp cloth to clean the monitor. Never use any solvent which could damage
the housing surfaces.
Do not exert any strong downward pressure on the sensitive display surfaces.
Replacing the fuse
If changing the fuse is required, make sure to only use fuses of specified type and rated current
(see Technical data).
Flicking the fuses or bridging the fuse holder is not permitted.
• Disconnect the monitor from the power supply.
• Screw on the fuse holder in the red access line.
• Remove the defective fuse and replace it with a fuse of the same type.
• Reseal the battery fuse holder.
• Only reconnect the monitor to the on-board power supply and operate afterwards.
• If the fuse is triggered again bring the device to repairs in a specialist workshop.
Disposal
a) Product
Electronic devices are resources and must not be disposed of through household
waste!
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
Remove the inserted battery from the remote control and dispose of it separately from
the product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/recharge-
able batteries. Disposing of them in the household waste is prohibited.
Batteries containing hazardous substances are identified with the accompanying sym-
bol, which indicates the ban on disposal in the household waste. The designations for
the heavy metals involved are: Cd=Cadmium, Hg=mercury, Pb=lead(designation on the
batteries e.g. under the refuse bin symbol depicted on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality,
our stores or wherever (rechargeable) batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Operational voltage ....................................................................12 - -24 V/DC
Power consumption....................................................................600/300 mA max. at 12 V/24 V
Battery remote control ...............................................................3 V Lithium button cell CR2025
Fuse ...............................................................................................2 A/250 V (5 x 20 mm)
Display size ..................................................................................25.6 cm (10,1")
Display format..............................................................................16:9
Display resolution ......................................................................1024 x 600
TV Format (automatic switch over) ..........................................PAL/NTSC
Measurements (without mounting bracket and sun visor) ....285 x 184 x 34 mm
Weight ...........................................................................................approx. 920 g
Operating temperature...............................................................-10 to +60 °C
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.