Checking The Video Input - JVC BD-X200E Bedienungsanleitung

Settings & Controls for Recording

Checking the Video Input

Use the monitor connected to the VIDEO LINE OUT terminal to confirm that the input video signal is as required.
The following procedure will allow you to monitor the quality at which the video will be recorded to a DVD.
DVD RECORDER BD-X200
TITLE CHAPTER
DOLBY DIGITAL
LPCM MPEG
REV STOP PLAY FWD PAUSE REC TOP
MENU
REC button
The bit-rate setting value is
indicated on the LCD display.
ENCODING XX
Bit-rate value
E-36
All manuals and user guides at all-guides.com
VIDEO LINE OUT terminal
VIDEO
IN LINE OUT INPUT
LEVEL
Y/C
IN
DV IN/OUT
LAN USB
SIGNAL
GND
Signal Connections
Connect the VIDEO LINE OUT terminal to the monitor.
BUSY
OPEN/CLOSE
Procedure
Press and hold the REC button for at least 2 seconds while the DVD
OPTION DV Y/C LINE
SET UP
recorder is stopped or inserted with no disc. While this button is being
held, input signal encoded/decoded in MPEG will be output via the VIDEO
SET
MENU
OUT terminal on the rear panel.
● This function allows the quality of the video to be confirmed before recording
to a DVD.
Note
Audio will be muted at this time.
AUDIO
CH1
IN OUT
4dB
8dB
CH2
REMOTE
DC 19V
Monitor screen