Event Messages; Alarm Messages - JVC BD-X200E Bedienungsanleitung

CH1
CH2
No.
2
Indication of the current operating mode
PLEASE WAIT : The DVD recorder is starting up.
OPERATE OFF : The DVD recorder is preparing to shut down.
NO DISC : The DVD recorder currently contains no disc.
LOADING : A disc is being loaded into the DVD recorder.
DVD-R : The current disc is a non-finalized DVD-R. (Approximately 3 seconds)
DVD-RW : The current disc is a non-finalized DVD-RW. (Approximately 3 seconds)
DVD : The current disc is a finalized DVD-R or DVD-RW. (Approximately 3 seconds)
REC PAUSE : The DVD recorder is switching from Recording mode to Recording Pause mode.
REC STOP : The DVD recorder is switching from Recording mode to Stop mode.
MENU EDIT : A title menu or chapter menu is currently being edited.
EJECT : The current disc is being ejected.
TITLE CLOSE : The DVD recorder is performing title-close processing.
FINALIZE : The DVD recorder is finalizing the disc.
ERASE : The DVD recorder is erasing data from a DVD-RW disc.
TOP MENU : The disc's top menu is being played.
MENU : A menu is being played.
ENCODING XX : Encoded video is being output. (XX indicates the bit rate.)
Display of the Setup Menu
Menu items and setting values from the Setup Menu are displayed. (☞ Page 74)

Event messages

Messages relating to incorrect operation and the like are displayed for approximately 3 seconds. (☞ Page 19)

Alarm messages

Alarms are displayed when the DVD recorder cannot obey a command. (☞ Page 20)
All manuals and user guides at all-guides.com
OPERATE
OPTION DV Y/C LINE
DVD RECORDER BD-X200
AUDIO
TITLE CHAPTER
DOLBY DIGITAL
LPCM MPEG
PHONES REV STOP PLAY FWD PAUSE REC TOP
MENU MENU
TITLE CHAP
DOLBY DIGITAL
LPCM MPEG
BUSY
OPEN/CLOSE
SET UP
SET
2
Description
E-15