System-Setup - Mettler Toledo LV12 Referenzhandbuch

3.4 System setup
Following system setups are supported by the LV12:
XP/XPE balances with RS232 connection
LV12 can be controlled by a METTLER TOLEDO XP/
XPE balance with RS232 interface. The program for
the control must be available in the weighing
instrument (e. g. SQC or statistics application in
Excellence balance).
IND890SQC direct connection
LV12 and balance are directly connected to an IND890SQC system (LV12 by RS232, balance by USB).
Automatic Feeder
RS232
USB B
USB (A/B)
XPR balances with USB connection
LV12 can be controlled by a METTLER TOLEDO XPR
balance with USB interface.
USB A
USB A
RS232
USB B
USB (A/B)
Design and Function​ ​ 9