Troubleshooting; Cleaning And Maintenance - Dometic DM50NTE D CL Montage- Und Bedienungsanleitung

DM50NTE D CL, DM50NTE F CL
I
NOTE
The minibar sets the cooling temperature automatically to 7 °C, when it
is connected to a power source.
8

Troubleshooting

Fault
Device does not
function, Power Status
LED does not glow.
The device does not
cool (plug is inserted,
Power Status LED
glows).
The Error LED flashes
once per second.
Device does not cool
sufficiently, Power
Status LED glows, Error
LED does not glow.
9

Cleaning and maintenance

!
WARNING! Electrocution hazard
Always disconnect the minibar from the mains before you clean and
service it.
A
NOTICE! Damage hazard
• Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the minibar.
• Never use hard or sharp tools to remove ice or to free objects frozen
onto the minibar.
• Do not use any mechanical tools or any other tools to speed up the
defrosting process.
EN
Possible cause
No voltage present in
the AC voltage socket.
The mains adapter is
defective.
The cooling element is
defective.
Temperature sensor is
defective.
The cooling element is
defective.
Poor ventilation
Suggested remedy
Try using another plug socket.
This can only be repaired by an
authorized service agent.
This can only be repaired by an
authorized service agent.
This can only be repaired by an
authorized service agent.
This can only be repaired by an
authorized service agent.
Check the ventilation.
Clean the filter underneath the device.
Troubleshooting
21