Operating The Sacd 1260 R - T+A SACD 1260 R Betriebsanleitung

Switching on
Press the   button on the front panel of the unit.
 
The green indicator LED above the button lights up, as
does the display screen. The unit is now ready for use.
For Stereo playback (CD /SACD) switch ON your HiFi
system and select the audio input the SACD 1260 R is
connected to.
Loading a Disc
1. Press the   button on the front panel to open
 
the drawer.
2. Place the disc in the centre of the circular recess in
the drawer, with the side to be played facing down.
3. Press the   button on the front panel to close
 
the drawer.
Starting playback
CD and SACD are started by pressing the 
button.
Stopping playback
You can stop playback at any time by pressing the
 button.
  

Operating the SACD 1260 R

 -
 
36
Selecting a Track
1.) Selecting using a skip button
You can initially select CD titles by pressing the skip
forward button   or the skip back button 
 
until you reach the desired track.
2.) Selecting track - direct numeric input
It is also possible to select a CD track by entering the
number of the track using the numeric buttons
(  . . .   ) on the remote control handset.
   
Note:
If the number has more than one digit, press the digits
quickly in sequence.
SEARCH
The standard search is started by pressing the front
panel buttons   /   or the remote control
   
buttons   /   . Press the search button again to
   
increase the search speed to 32 times normal speed.
The search can be stopped at any time by pressing the
 button.
  
REPEAT
The device offers several REPEAT-modes for repeating
chapters, titles or entire discs:
SACD Title / Disc / off
•
CD Title / Disc / Program / off
•
REPEAT mode
Screen display
(short message)
Title
RPT TRACK
Track
Disc RPT DISC
Repeat Disc
RPT PROG
Program
Off RPT OFF
To switch on and select a REPEAT mode press the
 button on the front panel repeatedly until the
  
desired mode is displayed.
The REPEAT mode 'PROGRAM' can only be selected,
when before a MEMO program was created.
REPEAT using the F1/F6 remote control handset
• The REPEAT-modes can be selected with the 
button.
 repeatedly
 
Screen display
(persistant)
RT
RD
RP
  