Emptying The Grass Catcher Box; After Finishing Work; Transporting - Stihl RMA 443 Gebrauchsanleitung

13 After Finishing Work

► Open flap (1) as far as the stop and hold.
► Set ECO switch (2) to the I position.
► Close flap (1).
12.4 Mowing
► Push the lawn mower forwards slowly and in a
controlled manner.
12.5 Emptying the Grass Catcher
Box
The flow of air generated by the blade raises
level indicator (1). The flow of air stops when the
grass catcher box is full. If the flow of air is too
low, level indicator (2) returns to its resting state.
This is a prompt to empty the grass catcher box.
The functionality of the level indicator is restric‐
ted if the flow of air is impaired. External influen‐
0478-131-9960-C
ces such as wet, dense or high grass, low cutting
levels, contamination or the like can impair the
flow of air and the functionality of the level indica‐
tor.
► If the level indicator drops to its resting state:
empty the grass catcher box.
► Switch the lawn mower off.
► Detach the grass catcher box.
► Open tab (1).
► Fold up upper part of grass catcher box (2) at
handle (3) and hold.
► Hold lower handle (4) with the second hand.
► Empty the grass catcher box.
► Close the grass catcher box.
► Attach the grass catcher box.
13 After Finishing Work
13.1 After Finishing Work
► Switch off the mower, remove the activation
key and battery.
► If the mower is wet: Allow the mower to dry.
► If the battery is wet: Allow the battery to dry.
► Clean the mower.
► Clean the battery.

14 Transporting

14.1 Transporting the Lawn Mower
► Switch the lawn mower off.
The blade must not be turning.
► Pull out the activation key and remove the bat‐
tery.
Pushing the lawn mower
► Push the lawn mower forwards slowly and in a
controlled manner.
Carrying the lawn mower
► Wear work gloves made from resistant mate‐
rial.
English
35