Lifting The Vehicle - ATH-Heinl Pure Lift 2.40 Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

Lifting the vehicle

g. Raise the vehicle slightly (without the wheels lifting off the ground) by pressing the "Lift"

button and check that all carrier plates are correctly positioned. Readjust if necessary.

h. See brief operating instructions

Raise the car to a height of 100-150mm and stop lifting by releasing the lift button

Check that the car is safely on the lift and that the arm lock is activated.

j. Then continue to lift and observe the lifting process.

LOWER the lift

a. Before LOWERING, check that there are no people or objects under the vehicle or the

carrying arms.

b. LIFT the lift approx. 4 cm so that you are sure that the lift truck is not in the safety catch.

c. Then first actuate the release lever for the safety catches and then actuate the lowering

lever of the hydraulic unit and keep it actuated until the lowering process is finished. While

lowering the vehicle, keep an eye on the vehicle; if you make a mistake, release the lever

immediately.

Release lever for the safety catches

Lowering lever of the hydraulic unit

Completion

k. Lower the platform completely.

TURN the support plate down and swivel the support arms back into the 90 ° position.

m. Drive out the vehicle.

Produkthersteller ATH-Heinl GmbH & CO.KG

- 22 -

Inhaltsverzeichnis