ATH-Heinl Pure Lift 2.40 Bedienungsanleitung Seite 66

3. Mount the support arms
a. Install support arms and properly secure and lubricate the bolt.
b. When the support arm is fully extended, check that all stops are working properly, adjust if
necessary.
c. Check support arm lock and adjust if necessary. Check for function when lowered.
4. Hydraulic oil
d. d. Fill hydraulic oil (see technical data) into the tank until the oil level has reached the mark
on the dipstick.
e. e. There is air in the hydraulic circuit during commissioning. Move the lift up and down at
least 10 times and make sure that there is sufficient hydraulic oil in the system. Carefully
approach the upper limit switch the first time and check that it is working. Leave the cap of
the tank open and top up with oil if necessary.
5. Electrical connection
® Urheberrecht ATH-Heinl GmbH & CO.KG, Alle Rechte vorbehalten / Druckfehler und technische Änderungen vorbehalten / Stand: 2021-08
Pure Lift 2.40
Produkthersteller ATH-Heinl GmbH & CO.KG
- 17 -