ATH-Heinl Pure Lift 2.40 Bedienungsanleitung Seite 70

Preparation
READ AND OBSERVE the safety instructions, operating instructions and statutory BG requirements.
a. Lower the lift completely.
b. Set the support arms parallel in the approach direction.
c. Drive the vehicle in the center of the lift so that the arms can be swiveled to the vehicle
mounting points. If necessary, roll the vehicle forwards or backwards.
d. Pay attention to the given weight distribution.
e. Swivel the support arm under the vehicle to the specified position and unscrew the support
plate until it lightly touches the mounting point. A lifting plate may be necessary for various
vehicles. Use only one increase per plate.
f. With the multi-part support arms, all parts should be pulled out evenly. This is the only way
to ensure an even load on the lift.
Maximum support plate increase H = 200 mm. Use only one-piece
elevations.
® Urheberrecht ATH-Heinl GmbH & CO.KG, Alle Rechte vorbehalten / Druckfehler und technische Änderungen vorbehalten / Stand: 2021-08
Produkthersteller ATH-Heinl GmbH & CO.KG
- 21 -